Quikchek Aerosol Simulants (Chemical and Biological)
QuikChek administers a small aerosol challenge to chemical and biological collection, detection and identification equipment. Many situations arise where it would be useful to have a method for qualitatively determining that equipment is working. With gas detectors, a small pulse of gas is commonly administered to the equipment before it is taken out into the field to see if an upscale reading is obtained. This safety measure is called a ‘bump test’ and shows that the equipment is operational.
For performing both chemical and biological “bump tests,” we provide a medical inhaler that has been charged with a nontoxic pressurized propellant and in the case of biological bump tests, a small amount of simulant powder. When the inhaler canister base is depressed, a fixed volume of propellant and any suspended aerosol material present is discharged as a turbulent jet. Some applications include:
- Testing air sampling and extraction equipment
- Testing ultraviolet biological aerosol detectors such as Research International’s Tac‑7® aerosol detector
- Testing bioidentification devices such as tickets (lateral flow immunoassays)
- Testing gas detectors that have the propellant used in this product in their gas library
- Studying aerosol dispersion in various settings
- Equipment demonstrations for customers
The propellant used in RI’s QuikChek aerosol simulants is the same propellant used in most medical inhalers and is of a high purity, with minimal oil and other contaminants. A special high accuracy metered-volume valve is used which provides an output dose that is consistent to within 5% from shot to shot.
Since the simulant materials are physically suspended in the propellant, it is essential that the unit be well shaken before each use. The check source size and shape minimizes issues with airline personnel who otherwise prefer to confiscate all pressurized products found in carry-on luggage.
To order call 1-800-927-7831 or send email to firstname.lastname@example.org and put the word "simulants" in the message header.
- Easy to use
- Easy to transport
- Toxin simulants
- Spore simulants
- Chemical/flammable gas simulant
- Repeatable doseage
- Long life- over 100 shots
- CBW/TIC gas detectors
- UV biotriggers
- Air samplers
- Lateral flow immunoassays
- Automated bioers
- Postal room biothreats
- Product demonstrations
Product Specification: QuikChek Aerosol Simulants (Chemical & Biological)
|Number of sample discharges||Greater than 100 per sample canister|
|Propellant||High purity tetrafluoroethane|
|Typical propellant loading per canister||18 ml|
|Volume discharged per shot||100 µl|
|Variation in volume discharged||± 5%|
|Typical simulant loading per canister||50 mg (other loadings on special order)|
|Simulant container||Aluminum medical inhaler canister|
|Simulant||Mass median aerodynamic diameter, microns, typ.|
|ISO 12103-1, A2 Arizona Fine Test Dust||1.0-1.5|
|Bacillus globigii, ATCC 9372, var. Niger||3.1|
|Fluorescent yellow fluorophore(2)||2.6|
|Fluorescent orange fluorophore(2)||2.9|
|Propellant(3)||No significant aerosol content|
- From chicken egg white.
- Organic fluorophore materials showing strong emission under long wavelength UV excitation. Solid solutions of fluorescent dyes in melamine formaldehyde sulphonamide resin. Fluorescent pigments are currently in use in children’s toys in the U.S. and elsewhere. Specific gravity is 1.37.
- For testing gas detectors, etc.