Research International - Sensors and sensing systems with special focus on tools for bioagent collection and detection.

 

 

Toll Free: (800) 927-7831
Phone: (360) 805-4930

SASS 2300 Wetted-Wall SASS 2400 Low-Volume SASS 3100 Dry Air SASS 3100 Plus: Dry Air + Extractor SASS 3010 Particle Extractor SASS 4000 Concentrator SASS 4100 Two-Stage Collector All Air Samplers All Products Bluetooth BioLink Data Radio
BioHawk 8-Channel Air Sampler and Bio-Identifier RAPTOR 4-Channel Bio-Identifier ASAP II Bio-Agent Threat Monitoring Analyte 2000 Fluorometer PR 610-2 Food Safety Device Hand-Held Assays for Bio-Threat Agents All Products Bluetooth BioLink Data Radio
Dry Air Sampler + Extractor Concentrator + Wet Collection Two-Stage Collector + Extractor Concentrator + Bioidentifier
Product Bibliography Homeland Security/Safety Act Appoved A Ricin Primer Avian Influenza Request Quote
Research/Development Collaboration/Licensing Export Limitations Research Machine
About Us Map to RI Contact Research Machine News Sitemap

 

Analyte 2000 Logo

Monitoring of Toxins, Explosives and Chemical Contaminants

Photo of Analyte 2000 fluoroimmunoassay system

The Analyte 2000 is a 4-channel, single wavelength fluorometer optimized for performing evanescent-wave fluoroimmunoassays that was developed in conjunction with the Naval Research Laboratory for biomolecule detection. This low-power, microprocessor-controlled instrument provides parts-per-billion sensitivities to biochemical species, such as proteins, viruses, bacteria, and spores, by monitoring antibody/antigen reactions on tapered glass waveguides. The instrument is controlled from a remote computer leading to a system size of only 20 cm L  x 8.5 cm H x 11.2 cm W. The Analyte 2000, coupled with a separate fluidics box, has been flown and operated in small, unmanned air vehicles (UAVs) using a remote RF link to a ground-based portable computer.

Analyte Adapter

The Analyte Adapter is a small optoelectronics module that serves an an interface between the Analyte 2000 and the inexpensive, injection-molded polystyrene waveguides developed for use with the RAPTOR fluoroimmunoassay system.

 

Analyte 2000™ System Specifications
Characteristic Description
Excitation Source 635 nm; 5 mW laser diode operated at a derated 1.5 mW level.
Receiver Design Dichroic long-pass filter to reject excitation light. Synchronous detector with auto gain-ranging
Photocurrent Resolution 0.019 pA; 12 bit A/D.
Dynamic Range 22, 522 pA
Maximum Number of Channels Four
Measurement Rate One sample per second.
Data Display Real-time CRT and numeric windows.
Data Output CRT, diskette, printer, or RS-232.
Sensor Interface Duplex fiber optic cable (1 m is typical) with female ‘ST’-type bulkhead connector at the distal end.
Sensor Waveguide Requirements Optimum fiber size at connector interface is 400 – 800 µm o.d.; ‘ST’ termination required.
Software Package Windows-based software is provided.
Operating Voltage 5.3 – 12 V Lump-in-cord AC adapter or 10-hr battery pack available.
Warm-Up Time 15 minutes
Physical Size 20.0 cm L x 8.5 cm H x 11.2 cm W
Weight 1.6 kg
Host Hardware Requirements IBM 486, 100 MHz or compatible; 8 MB RAM running Windows® 95.

Research International reserves the right to change specifications on any of the devices mentioned without prior notification.

 

Download 2010 Product Catalog

Application Areas:

  • Academic research
  • Medical
  • Controlled atmosphere chambers
  • UAV's (Unmanned Aerial Vehicles)

More Information:

We accept Visa and MasterCard
  • Adobe® Acrobat® Reader is necessary for viewing and printing .pdf files and is available to download at no charge from Adobe Systems.