HOME

Products

ASAP II™ collection / detection system

RAPTOR™ 4-channel bioassay system

Analyte 2000™ fluorometer

SASS ™ Series wetted-
wall air samplers


SASS™ 3000
dry air sampler


FAST 6000™ flow immunoassay system

Ferret II Plus™
spectral scanner


ChemCard 2000™ fiber optic measurement

Rechargeable battery Model 845™
divider line
Product Bibliography

About Us

Research and Development

News

Contact Us

Collaboration and Licensing

Research Machine

Request Quote

Sitemap

 

 

Analyte 2000™

 

Biological Detection

 


 

The Analyte 2000 is a 4-channel, single wavelength fluorometer optimized for performing evanescent-wave fluoroimmunoassays that was developed in conjunction with the Naval Research Laboratory for biomolecule detection. This low-power, microprocessor-controlled instrument provides parts-per-billion sensitivities to biochemical species, such as proteins, viruses, bacteria, and spores, by monitoring antibody/antigen reactions on tapered glass waveguides. The instrument is controlled from a remote computer leading to a system size of only 20 cm L  x 8.5 cm H x 11.2 cm W. The Analyte 2000, coupled with a separate fluidics box, has been flown and operated in small, unmanned air vehicles (UAVs) using a remote RF link to a ground-based portable computer.

Analyte Adapter

The Analyte Adapter is a small optoelectronics module that serves an an interface between the Analyte 2000 and the inexpensive, injection-molded polystyrene waveguides developed for use with the RAPTOR fluoroimmunoassay system.

Analyte 2000™ System Specifications

Characteristic

Description

Excitation Source

635 nm; 5 mW laser diode operated at a derated 1.5 mW level.

Receiver Design

Dichroic long-pass filter to reject excitation light. Synchronous detector with auto gain-ranging.

Photocurrent Resolution

0.019 pA; 12 bit A/D.

Dynamic Range

22, 522 pA

Maximum Number of Channels

Four

Measurement Rate

One sample per second.

Data Display

Real-time CRT and numeric windows.

Data Output

CRT, diskette, printer, or RS-232.

Sensor Interface

Duplex fiber optic cable (1 m is typical) with female ‘ST’-type bulkhead connector at the distal end.

Sensor Waveguide Requirements

Optimum fiber size at connector interface is 400 – 800 µm o.d.; ‘ST’ termination required.

Software Package

Windows-based software is provided.

Operating Voltage

5.3 – 12 V Lump-in-cord AC adapter
or 10-hr battery pack available.

Warm-Up Time

15 min

Physical Size

20.0 cm L x 8.5 cm H x 11.2 cm W

Weight

1.6 kg

Host Hardware Requirements

IBM 486, 100 MHz or compatible; 8 MB RAM running Windows® 95.

Research International reserves the right to change specifications on any of the devices mentioned without prior notification.


Call Research International at 1-800-927-7831

For more information, see:

Click image to link to Adobe Acrobat download page

Adobe® Acrobat® Reader is necessary for viewing and printing .pdf files and is available to download at no charge from Adobe Systems.

Analyte 2000 Parts, Accessories and Consumables

 


Copyright © 2006 by Research International, Inc. All rights reserved.
17161 Beaton Road SE, Monroe, WA 98272-1034 • 360-805-4930 • info@resrchintl.com

Site last updated October 25, 2006